The Blog of D&G 4×4 Tuning

European Offroad Performance Specialists

Archive for September 2009

The Humbug: Update!

leave a comment »

Time for an update on the Humbug!

To give the engine enough cooling, the truck will have  2 radiators. One in the front and one in the rear (together with a big oilcooler. The radiator and oilcooler are made by Allisport.

The pipes from the engine to the radiator are stainless steel and run underneath the cabin through the tubular chassis to give additional protection!

In the meanwhile we made some plates in the cab with a tunnel for the electrical cables.

New updates will follow very soon!

LRO Show – Peterborough

leave a comment »

As we announced earlier, D&G 4×4 Tuning was exhibiting at the LRO Show at Peterborough.

We had a great show and would like all the people who made the effort to give us a visit!

Some pictures:

The Humbug: Update

leave a comment »

The built of the buggy came to a point where some decisions had to be made concerning the exact placement of accessories such as lights, winch attach points, fridge, fire extinguisher etc.

Also the radiator/oil cooler in the rear and the spare wheel have found their exact location.

We also have started to fabricate the panels such as the firewall, centre console, gearbox cover etc

Stay tuned for further updates!

26 en 27 September 09: 4×4 Activ Days – Inor!

leave a comment »

ACTIV 4X4 DAYS

Written by dgtuning

09/05/2009 at 12:02

Kaymar Sparewheel carriers

leave a comment »

Now available at D&G 4×4 Tuning:  Kaymar Sparewheel Carriers!

Kaymar 4WD Accessories design and manufacture the world’s leading range of rear bars, carriers and accessories for 4×4 vehicles.

The KAYMAR range of products are known for their versatility, functionality and durability accross Australia and the rest of the world!

Land Rover Discovery 3:


Kaymar’s Discovery 3 bumper is a steel replacement for the original plastic bumper.

A towbar is not incorporated into Kaymar’s bumper as the towbar is built as part of Landrovers chassis.

Original trailer plug and recovery point remain easily accessible.

Kaymar’s bar offers a full steel protection bumper following very closely to the lines of the original bar. As well as adding greater strength to the rear end this bar can also accommodate twin spare wheels or a single wheel carrier on one side and a single jerry can holder on the other.

Optional attachments such as a hilift jack holder, H/F aerial mount and telescopic light are also available.

Kaymar has incorporated fully ADR approved LED lights to comply with ADR lighting requirements. These lights are slim line and maintenance free.

Original equipment reversing sensors can be re-fitted into Kaymar’s bar.

As with all Kaymar carriers, the carriers are easily removed in about five minutes.

For more info on the Kaymare range do not hesitate to contact us on info@dgtuning.com and check the Kaymar website for all other options and models !

Visit D&G 4×4 Tuning @ LRO Show – Peterborough

leave a comment »

12 and 13 September 2009,  D&G Tuning will exhibit at the LRO Show at Peterborough, one of the biggest Land Rover Show in the world!

Come and have a look at our stand and discover the newest products and innovations, our Spidertrax Spider 9 bolt on kit for Land Rover Defender, the new Staun wheels and much more!!

See you there!